Confirm Feed and Chemistry
Review feed size, moisture, bulk density, hardness, purity limits and any oxidation or safety constraints.
Menu
CR600 Impact Mill ProjectA verified Anhui project processed lithium carbonate from less than 1 mm feed to D50 5–8 μm at 500 kg/h using a CR600 superfine impact mill.
The project combined a D50 5–8 μm target with a reported production capacity of 500 kg/h from a feed below 1 mm.
For a comparable line, testing should confirm grindability, heat generation, wear, classification efficiency and stable collection at the required throughput.
The verified project parameters show the achieved reference result. A new production line should be selected from representative material tests, not from the reference values alone.
Review feed size, moisture, bulk density, hardness, purity limits and any oxidation or safety constraints.
Test achievable fineness, capacity trend, product collection and the stability of the target particle size.
Use the test result to select the mill size, classifier setting, gas supply and downstream collection arrangement.
A comparable lithium carbonate line can be configured around the CR600 impact mill with integrated size control and product collection.
The values shown here come from the supplied project record and are not a universal performance guarantee. Throughput and particle size change with feed properties, operating settings, gas conditions and the collection system.
For a new material, Mills Powder should reproduce the target through a laboratory or pilot test before confirming a commercial configuration.
Review Mills Powder impact mill options for fine dry grinding with integrated classification and production-scale capacity.
Send the feed characteristics, target fineness and production requirement so the grinding system can be evaluated around your material.