Confirm Feed Properties
Review composition, feed form, moisture, hardness, abrasiveness, hazardous constituents and recovery objective.
Menu
AF800 Air Classifier ProjectA verified Shandong reference used an AF800 air classifier for particle-shaped water-granulated slag, producing a reported 1,250 mesh product. The source page reports throughput as 2,000 g/h; this unit is retained without conversion.
The source project required particle-shaped water-granulated slag to reach a reported 1,250 mesh product using an AF800 air classifier.
A comparable project should test feed distribution, moisture, bulk density, agglomeration, abrasion, target cut point and recovery before model selection.
The reported values document one completed reference. A new solid-waste stream should be tested because composition, moisture, abrasiveness, valuable-component distribution and contamination can vary by source.
Review composition, feed form, moisture, hardness, abrasiveness, hazardous constituents and recovery objective.
Verify achievable distribution, classification behavior, usable yield, dust handling and product recovery.
Use the test result to select mill or classifier size, wear protection, collection and safe material handling.
A comparable slag project can be evaluated around an AF800 classifier with controlled feeding, air-volume control and efficient powder collection.
These values come from the authorized project record and describe this reference only. They are not a universal performance guarantee.
A new material should be tested before model selection because composition, moisture, temperature limit, operating settings and product collection all affect capacity and particle size.
Review the Mills Powder AF air classifier range for dry classification of slag and other mineral or recycled powder streams.
Send the feed distribution, target cut point and throughput for air classifier testing and system selection.