Confirm Feed Properties
Review composition, feed form, moisture, hardness, abrasiveness, hazardous constituents and recovery objective.
Menu
CR800 Impact Mill ProjectA verified Jiangxi reference used a CR800 impact mill to process 150 × 150 × 120 mm honeycomb catalyst feed into a reported 800 mesh product. The source page reports throughput as 500 g/h; this unit is retained without conversion.
The project required 150 × 150 × 120 mm honeycomb catalyst feed to reach a reported 800 mesh product using a CR800 impact mill.
A comparable project should confirm whether preliminary breaking is required, then test carrier hardness, valuable-component distribution, wear, product recovery and dust handling.
The reported values document one completed reference. A new solid-waste stream should be tested because composition, moisture, abrasiveness, valuable-component distribution and contamination can vary by source.
Review composition, feed form, moisture, hardness, abrasiveness, hazardous constituents and recovery objective.
Verify achievable distribution, classification behavior, usable yield, dust handling and product recovery.
Use the test result to select mill or classifier size, wear protection, collection and safe material handling.
A comparable honeycomb-catalyst project can be evaluated around staged feed preparation and a CR800 impact mill with integrated size control and dust-tight recovery.
These values come from the authorized project record and describe this reference only. They are not a universal performance guarantee.
A new material should be tested before model selection because composition, moisture, temperature limit, operating settings and product collection all affect capacity and particle size.
The original report is displayed as supplied with the authorized project material. No replacement curve or reconstructed particle-size distribution has been created.
Review the Mills Powder impact mill range for honeycomb catalyst, recycled ceramic carriers and related recovery applications after material testing.
Send the feed dimensions, target fineness and recovery goal for staged preparation and milling review.