Confirm Feed Properties
Review moisture, oil or protein content, feed form, bulk density, hygiene requirements and temperature limits.
Menu
Impact Mill ProjectA verified Russian project used a superfine impact mill to process peeled pea feed from 5–10 mm into a reported 325 mesh product at 2,500 kg/h.
The project required 5–10 mm peeled pea feed to reach a reported 325 mesh product at 2,500 kg/h.
A comparable plant-protein project should verify moisture, starch and protein behavior, heat sensitivity, feed consistency, target distribution and product recovery.
The reported values document one completed reference. A new food or health-product powder should be selected from representative testing because oil, protein, moisture, heat sensitivity and feed structure can change the result.
Review moisture, oil or protein content, feed form, bulk density, hygiene requirements and temperature limits.
Verify achievable distribution, temperature trend, capacity, product recovery and cleanability.
Use the test result to select mill size, classification, material contact surfaces and collection arrangement.
A comparable peeled pea project can be evaluated around a high-capacity impact mill with metered feeding, integrated size control and dust-tight collection.
These values come from the authorized project record and describe this reference only. They are not a universal performance guarantee.
A new material should be tested before model selection because composition, moisture, temperature limit, operating settings and product collection all affect capacity and particle size.
The original report is displayed as supplied with the authorized project material. No replacement curve or reconstructed particle-size distribution has been created.
Review the Mills Powder impact mill range for fine processing of food ingredients, plant proteins and other heat-sensitive powders after material testing.
Send the feed condition, target particle size and capacity for impact mill testing and system selection.