Confirm Feed Properties
Review moisture, oil or protein content, feed form, bulk density, hygiene requirements and temperature limits.
Menu
CR600 Impact Mill ProjectA verified Hunan project used a CR600 superfine impact mill to process block-shaped chicken and beef powder into a reported 100 mesh product at 300 kg/h.
The project required block-shaped chicken and beef powder feed to reach a reported 100 mesh product at 300 kg/h.
A comparable application should test fat and moisture content, temperature rise, product adhesion, cleaning access and acceptable product recovery before equipment selection.
The reported values document one completed reference. A new food or health-product powder should be selected from representative testing because oil, protein, moisture, heat sensitivity and feed structure can change the result.
Review moisture, oil or protein content, feed form, bulk density, hygiene requirements and temperature limits.
Verify achievable distribution, temperature trend, capacity, product recovery and cleanability.
Use the test result to select mill size, classification, material contact surfaces and collection arrangement.
A comparable animal-protein powder project can be evaluated around a CR600 impact mill with controlled feeding, temperature monitoring and efficient collection.
These values come from the authorized project record and describe this reference only. They are not a universal performance guarantee.
A new material should be tested before model selection because composition, moisture, temperature limit, operating settings and product collection all affect capacity and particle size.
The original report is displayed as supplied with the authorized project material. No replacement curve or reconstructed particle-size distribution has been created.
Review the Mills Powder impact mill range for fine processing of food ingredients, plant proteins and other heat-sensitive powders after material testing.
Send the feed form, target fineness and capacity for impact mill testing and scale-up review.