Confirm Feed Properties
Review feed size, moisture, bulk density, thermal sensitivity, dust behavior and acceptable contamination.
Menu
CR1000 Impact Mill ProjectA verified Shandong project used a CR1000 superfine impact mill to process aluminum hydroxide below 10 mm into a reported 7–15 μm product at 800 kg/h.
The project required aluminum hydroxide feed below 10 mm to reach a reported 7–15 μm product at 800 kg/h.
For a comparable material, testing should verify the full particle-size distribution, temperature rise, moisture behavior, product dispersibility and usable yield.
The reported values document one completed reference. A new process should be selected from representative testing because feed condition, thermal sensitivity, moisture, dispersibility and collection behavior can change the result.
Review feed size, moisture, bulk density, thermal sensitivity, dust behavior and acceptable contamination.
Verify achievable particle size, capacity trend, temperature rise, product recovery and dispersion.
Use the test result to select mill size, classifier settings, contact materials, safety controls and collection arrangement.
A comparable aluminum hydroxide project can be configured around a CR1000 impact mill with integrated classification and high-efficiency collection.
These values come from the authorized project record and describe this reference only. They are not a universal performance guarantee.
A new material should be tested before model selection because feed condition, operating settings, temperature limits and collection efficiency all affect capacity and particle size.
The original report is displayed as supplied. No replacement curve or reconstructed particle-size distribution has been created.
Review the Mills Powder impact mill range for fine chemical powders and flame-retardant materials.
Send the feed size, target particle distribution and capacity for impact mill testing and scale-up review.