Confirm Powder Properties
Review composition, feed distribution, bulk density, moisture, oxygen sensitivity and explosion characteristics.
Menu
AF050 Air Classifier ProjectA verified Hebei project used an AF050 air classifier to produce alloy powder with a reported D10 above 5 μm at 50 kg/h.
The project required an alloy powder product with a reported D10 above 5 μm at 50 kg/h using an AF050 air classifier.
A comparable classification project should verify the full feed distribution, acceptable fine fraction, target recovery and product morphology before setting the cut point.
The reported values document one completed reference. A new metal-powder line should be selected from representative testing because particle shape, oxidation sensitivity, bulk density and feed distribution can change the result.
Review composition, feed distribution, bulk density, moisture, oxygen sensitivity and explosion characteristics.
Verify particle-size distribution, usable yield, fines recovery, system stability and gas demand.
Define protection gas, oxygen monitoring, pressure control, contact materials and collection arrangement.
A comparable alloy-powder project can be evaluated around an AF classifier with controlled feeding, dynamic separation and high-efficiency product collection.
These values come from the authorized project record and describe this reference only. They are not a universal performance guarantee.
A new material should be tested before model selection because feed distribution, operating settings, safety requirements and product recovery all affect capacity and particle size.
The original report is displayed as supplied. No replacement curve or reconstructed particle-size distribution has been created.
Review the Mills Powder AF classifier for adjustable dry powder cut points and production-scale classification.
Send the feed distribution, target cut point and required capacity for classification testing and equipment selection.